Vibration reduction, G vibration reduction, A 123) i – Nikon S710 User Manual
Page 135: A 123), A 123, A 123) setting a, Gvibration reduction
123
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, Playba
ck an
d
Se
tu
p Me
nu
s
g
Vibration reduction
Vibration reduction effectively corrects blur that commonly occurs when shooting
with zooming or at slow shutter speeds. Vibration reduction can be used in all
shooting modes.
Turn vibration reduction
off when using a tripod to stabilize the camera during
shooting.
The vibration reduction setting can be confirmed on the monitor during shooting
(See “The vibration reduction / motion detection icon” (
B
Notes on Vibration reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed on the camera’s
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shaking in some
situations.
• “VR” stands for vibration reduction.
On (default setting)
Vibration reduction is enabled during shooting.
Off
Electronic vibration reduction is not enabled.