Nikon 995 - Manual (Page 66)

131 130
Setting Shooting SET-UP Menus
—continued Shooting Mode
Controls
Shooting SET-UP Items (only in mode)
You can use the Controls setting to specify whether individual
functions are retained in the camera or cleared from the camera’s
memory when you turn the camera off. Various alternative functions
can be selected and assigned to the FUNC. 1 (Exposure mode button)
and FUNC. 2 (Exposure Compensation button).
Memorize
Memorizes the settings that remain in camera’s
memory when the camera is turned off.
FUNC. 1
Pressing the MODE button activates the chosen
alternate function.
FUNC. 2
Pressing the ≠ button activates the chosen alternate
function.
— Memorize —
The Memorize determines what settings remain in effect when the
camera is turned off.
Any items that are not checked will be restored to default settings
when the camera is turned off.
Memorizes the flash mode setting.
Memorizes the Focus mode setting.
MODE Memorizes the Exposure mode setting.
Memorizes the Exposure Compensation setting.
Done Completes the setting.
To check an item, or to remove a check mark from an item that has
already been checked, highlight the item and press > on the Multi
selector. Highlight “Done” and press > to put the change into effect.
— FUNC. 1/FUNC. 2 —
By default, the (FUNC.1) button controls exposure mode and the
(FUNC. 2) button controls exposure compensation. Using the
FUNC. 1 and FUNC. 2 menus, you can assign different functions to
these buttons in
mode.
Mode
Assigns Exposure mode operation.
FUNC. 1 default.
Assigns Focus mode (including Self-timer and
Manual focus) operation.
Assigns Flash mode and ISO sensitivity operation.
White Balance Assigns White Balance operation.
Assigns Exposure Compensation operation.
FUNC. 2 default.
Metering Assigns Exposure Metering operation.
Check point
For even greater ease of use, when White Balance
operation is assigned to the Exposure mode button
or Exposure Compensation button using FUNC. 1
or FUNC. 2, rotating the Command dial while
pressing the button changes the display so that
PrE (White Bal Preset), Sun (Fine), Inc
(Incandescent), Flu (Fluorescent), Clo (Cloudy) or
FLa (Speedlight) appears with the W-BAL. (White
Balance) indication on the Control panel.
Setting FUNC. 1/2
1 Press ≤/≥ on the Multi selector to highlight the selection and
press > to select. The Monitor returns to the SET-UP menu.
2 Press the MENU button to complete the setting. The assigned
function can now be activated using the FUNC. 1 (Exposure
mode) button or FUNC. 2 (Exposure Compensation) button.
• Operation after FUNC. 1 or 2 setting
Exposure mode, ISO Sensitivity,
White Balance, Exposure
Compensation, Exposure Metering
Focus mode
Flash mode
Menus
COOLPIX995 (E) 01.5.30 0:43 PM Page 130