Nikon Speedlight SB-700 - Manual (Page 136)

H–7
Tips on Speedlight Care and Reference Information
H
Tips on Speedlight Care
Cleaning
Dirt on the flash panel can cause it to break when the flash is fired. •
Clean the flash panel regularly.
Use a blower brush to remove dirt and dust from the SB-700
•
and clean it with a soft, clean cloth. After using the SB-700 near
saltwater, wipe the flash unit with a soft, clean cloth moistened
slightly with plain water to remove the salt, then dry it using a dry
cloth.
On rare occasions, the LCD may turn on or go dark, due to static
•
electricity. This is not a malfunction. The display will soon return to
normal.
Do not drop the SB-700 or hit it against a hard surface, as this may
•
damage its precision mechanisms. Do not apply strong pressure to
the LCD panel.
"
WARNING
Never use thinner, benzene, or other active agents
when cleaning the Speedlight, as this may damage
the Speedlight or cause it to catch fire. Using these
agents may also impair your health.