Nikon LS-9000 - Manual (Page 83)

74
Checking Device Registration (Windows Only) Checking Device Registration (Windows Only)
The fi rst time the scanner is connected and turned on following installation of Nikon Scan,
Windows will “register” the scanner with the Device Manager. If the computer fails to detect
the scanner or the scanner does not function as expected when Nikon Scan is running, the
computer may not have correctly registered the scanner. Check that the device drivers are
correctly installed.
1 Make sure the scanner is connected and turned on
2 Display the “System Properties” dialog
Windows XP
Select Control Panel from the Start menu, open Performance and Maintenance, and
click System.
Windows 2000 Professional
Select Settings > Control Panel from the Start menu and double-click the System
icon.
Windows Me, Windows 98 SE
Select Control Panel from the Start menu and double-click the System icon.
3 Open the Device Manager
Windows XP, Windows 2000 Professional
Open the “Hardware” panel and click
the Device Manager button.
Windows Me, Windows 98 SE
Click the “Device Manager” tab.