Nikon LS-9000 - Manual (Page 50)

41
Step 9 — Eject and Exit Step 9 — Eject and Exit
1 Eject the holder
Press the eject button on the front of the
scanner or click the eject button in the
control area of the scan window. Ejec-
tion is complete when the status LED has
stopped blinking.
Removing Holders
Wait until ejection is complete before
removing the holder by hand.
2 Exit the host application
Select Exit (Windows) or Quit (Mac OS 9) from the File menu. In Mac OS X, open the
application menu and choose the “Quit” option for the host application.
3 Remove the scanner from the system (Windows Me/Windows 98 SE only)
Windows Me
Shut down the computer and turn the power off.
Windows 98 SE
Click the “Unplug or Eject Hardware”
icon in the task bar and select Stop
Nikon SUPER COOLSCAN 9000 ED
from the menu that appears. A message
will be displayed stating that the scanner
can be safely removed from the system;
click OK.
4 Turn the scanner off
Ejecting Holders
The holder will be ejected automatically if the scanner is turned off and then on again.
Scanner off Scanner on
Eject button