Nikon WP-N2 - Manual (Page 56)

17
En
4 Soak the case in fresh water.
Reseal the case and leave it in a basin of fresh
water for two to three hours. Operate each of
the controls a few times to remove salt. If salt
drys on the controls, they may cease to func-
tion or their metal parts may rust, causing the
case to leak.
5 Wipe dry.
Dry the case thoroughly with a soft, dry cloth.
Do not use a cloth to which salt has adhered.
6 Let the case dry in the shade.
Leave the case out to dry in a shady, well-ven-
tilated area.
D Do Not Expose to Sunlight or Heat
Do not use a hair dryer or other heat source or place the case in direct sunlight. Heat could
cause the case or O-ring to deteriorate, resulting in leakage.
D Cleaning the Interior of the Case
Use a blower, brush, or a damp, soft cloth to remove foreign objects from the interior of the
case. Liquid can be removed with a damp, soft cloth. When using a cloth, be careful not to
scratch the case; do not use unnecessary force. Do not use water, detergents, or chemical
agents of any kind. Water can damage the coating on the inside of the lens window.