Nikon WP-N2 - Manual (Page 50)

11
En
5 Insert the camera.
Center the camera in the camera guides with
the lens positioned in the lens window. Camera guides
D The Camera Strap
To ensure that the camera strap does not get caught in the seal and cause a leak, be sure
to remove the strap before placing the camera in the case.
D Underwater Flash Units
If you will be using a SEA&SEA YS-D1 underwater fl ash
unit (
0 21), raise the camera’s built-in fl ash before plac-
ing the camera in the case, as once placed in the case
the fl ash may fail to pop up on its own. See the camera
manual for information on using the fl ash.
Flash pop-up control
6 Insert desiccant.
To prevent condensation from forming inside
the case, insert the supplied silica gel desic-
cant between the bottom of the camera and
the case. Slide the desiccant to the front,
where it will not interfere with the case clos-
ing. Improper placement could cause the case
to leak.
A Replacing the Desiccant
Used desiccant loses its capacity to absorb moisture. We recommend replacing the desic-
cant each time the case is used (
0 21).