PerTronix Dougs Headers D4456 - Manual (Page 3)

Part No. 0110-003027
Page 3 of 3
Rev. 2 3-5-13 DSL
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or connector pipes.
All spark plug wires, battery cables, or other electrical components should be clear of headers
and/or connector pipes.
If dipstick tube was removed, make sure it is installed properly and that the dipstick has been
replaced.
Double-check the tightness of all bolts including brackets and accessories.
PARTS LIST
Please check the following parts list to make sure that you have received all the parts needed to
complete the installation.
Qty. Description
1 Right side header
1 Left side header
1 Right side crossover pipe
1 Left side crossover pipe
1 Catalytic converter adapter
1 2 ½” clamp (crossover pipe)
1 Gasket header left side
1 Gasket header right side
1
2 ½” metal donut gasket
1 3” gasket, 3 bolt collector
1 Decal:
DOUG’S HEADERS
1 Sticker, C.A.R.B., E.O., D-57-19
1 Hardware kit:
17 8mm x 1.25 x 30mm hex flanged bolts
17 8mm lock-washers
3 3/8”-16 x 1 ¼” hex bolts
6
3/8”-16 x 2 ¼” hex bolts
9 3/8”-16 hex nuts
9
3/8” lock-washers