PerTronix Dougs Headers D3333 - Manual (Page 3)

Part No. 0110-003090
Page 3 of 3
Rev2 9-6-13 DSL
STARTING THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while
the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten
after the first 500 miles and then again at 1000 miles.
PARTS LIST
Qty Description
1 Left side header
1 Right side header
2 Header gaskets
16 8mm-1.25 x 25mm, header & AIR bolts
16 Lock-washer (8mm)
2 Gasket (A.I.R.)
6 3/8-
16 x 2 ½” Collector Hex head bolts
6 3/8-16 Hex Nuts
6
3/8” Lock washers
1 Sticker (C.A.R.B., E.O., D-57-19)
2 Dou
g’s Stickers