Start the engine, Important check list, Parts list – PerTronix Dougs Headers D303Y-SP User Manual
Page 4

Part No. 0110-003001
Page 4
rev 8-15-11 DSL
START THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while the
engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten after the
first 500 miles and then again at 1000 miles.
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or connector pipes.
All spark plug wires, battery cables, or other electrical components should be clear of
headers and/or connector pipes.
If dipstick tube was removed, make sure it is installed properly and that the dipstick
has been replaced.
Double-check the tightness of all bolts including brackets and accessories.
PARTS LIST
Qty
Description
1
Left side header
1
Right side header
2
Header gaskets
2
2
½” reducers
2
2
½”, 3 bolt collector gaskets
16
3/8”-16 x 1” header bolts
6
3/8”-16 x 1 ¼” hex head cap screws
6
3/8”-16 hex nut
22
3/8” lock-washers
1
Hot Air Pickup Tube
1
Clamp, Worm Gear, Stainless, #24