ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 111)

Chapter 10. Maintenance
99
Restore
To restore system configuration settings, do the following:
1. In the Restore panel, click Browse.
2. Navigate to the directory where the backup file is located and select it.
3. When you return to the Backup/Restore page enter the password you set
when the backup file was created.
Note: If you did not set a password for the file, leave the field blank.
4. Click Restore.
When the Restore procedure has finished, a message stating that the
Matrix KVM Switch will reboot is sent to all users with active sessions.
After a short while the switch reboots. When it comes back up the
configuration settings that were restored from the backup file are in effect.