Asante Technologies FM2008/2009 - Manual (Page 39)

FriendlyNET FM2008/2009 39 User’s Manual
3.3.7.4 Max bridge transmit delay bound
• Max bridge transmit delay bound: Limits the packet queue
time in the switch. If enabled, the packets will be dropped from
the queue after the time has expired. Press the Space bar to
set the time. The options are 1 second, 2 seconds, 4 seconds
and off. The default is 1 second
• Enable Delay Bound: Limits the low priority packets’ queuing
time in the switch. If enabled, the low priority packets that stay
in the switch past the Max Delay Time will be sent. Press the
Space bar to enable or disable this function
Note: Make sure that Max bridge transit delay bound control is
enabled before enabling Delay Bound.
• Max Delay Time: Sets the time that low priority packets may
queue in switch. The valid range is 1–255 ms.
NOTE: Make sure that “Max bridge transit delay bound control” is
enabled before enabling Delay Bound.