Spektrum SPM20200 DX2.0 - Manual (Page 4)

Servo Reversing
1. With the transmitter power switch on, press the
SCROLL key to enter the Function mode.
2. Press the SCROLL key until “REV.NORM” appears on the screen.
The “ST” indicates the steering servo reversing screen.
3. Press the
INCREASE or DECREASE key to move the cursor
to the desired servo direction (REV.NORM).
4. Press the
CHANNEL key once to access the throttle servo reversing screen.
5. To select the direction of the throttle servo, repeat Step 3 above.
End-Point (Travel) Adjustment
1. From the Servo Reverse function, press the SCROLL key once to access
the End-Point (Travel) Adjustment function (the EPA screen with “ST” will appear).
Steering Adjustment
2. Rotate the steering wheel in the desired direction (left or right) to be adjusted.
3. Press the
INCREASE or DECREASE keys to select the
desired travel value.
Throttle Adjustment
4. Press the CHANNEL key once. TH will appear on the screen.
5. Pull the trigger for forward or push the trigger for brake adjustment.
6. Press the
INCREASE or DECREASE keys to select the desired travel value.
DX2.0 Quick
Start Setup
(continued)
SCROLL
ENtER
ChaNNEL INCREaSE
CLEaR
DECREaSE
st
REV • NORM
–
Indicates Current Channel
ST = Steering
TH = Throttle
Indicates Current Servo Direction
Indicates Current Adjustment Position
STR = Steering Right
STL = Steering Left
FWD = Forward Trigger
BRM = Reverse (brake) Trigger
Indicates Current Value
st
100
E P A
–
–