Sts – st – Spektrum SPM20200 DX2.0 User Manual

Page 18

Next, press the

SCROLL key until a beep is heard. The display will change to show the

first function listed on the Function Mode flow chart as shown below. Press the

SCROLL

key to scroll down through the functions one by one, as shown in the flow chart. Once the

desired function has been reached, use the

CHANNEL key to select the appropriate channel

(if applicable). To adjust the values of the function, simply press the

INCREASE (+) or

DECREASE (-) keys until the desired value is displayed on the screen. To exit function

mode, press the

SCROLL and CHANNEL keys at the same time. The next time you enter

Function mode, you will be returned to the last function accessed.

The End-Point Adjustment feature of the DX2.0 allows the maximum travel of both the

Accessing

the Function

Mode

Channel
Key

I00

TRIM

stS

–

I00

E P A

End-Point
Adjustment
(page 19)

Channel
Key

REV • NORM

–

Channel
Key

–

E P A

TRIM

tHS

–

REV • NORM

–

SB-TRM

Sub-Trim
(page 20)

Servo
Reversing
(page 21)

R/B

L/F

This manual is related to the following products: