Spektrum SPM20200 DX2.0 - Manual (Page 22)

The Direct Trim Mode function of the DX2.0 is accessible through the use of the electronic
throttle or steering trim levers, as well as the two electronic grip levers (A&B) located on
the upper portion of the grip handle. This function allows for quick trim adjustment of these
controls, without the need to access these functions through the four keypad control keys.
To access the Direct Trim Mode function, turn on the transmitter power switch. Next, move
the desired trim lever to be adjusted. The appropriate screen for the selected trim lever will
be displayed. To adjust, simply move the trim lever in the desired direction until the correct
amount of trim is achieved. Once the desired trim is achieved, the screen will return to the
Normal display screen after approximately two seconds from the last trim input. If the
INCREASE or DECREASE keys are pressed any time during the two seconds, the system
will return to the previous screen in use.
Accessing the
Direct Trim
Mode
(Function Mode)
TRIM
stC
–
0
tHC Throttle Trim
(page 24)
Steering Trim
(page 23)
0
R/B
TRIM
RATE
0
%
Brake End-Point
Adjustment
(Grip Lever A)
stG
–
E P A
0
BRK
Steering Dual-Rate
(Grip Lever B)
(page 25)