Allied Telesis Rapier Switch - Manual (Page 59)

Layer 2 Switching 59
Rapier Switch Software Release 2.2.1
C613-02013-00 Rev A
Script Parameters The trigger passes the following parameter(s) to the script:
Event LINKUP
Description The port link specified by the PORT parameter has just come up.
Parameters The following command parameter(s) must be specified in the CREATE/SET
TRIGGER commands:
Script Parameters The trigger passes the following parameter(s) to the script:
Argument Description
%1 The port number of the port which has just gone down.
Parameter Description
PORT=port The port on which the event will activate the trigger.
Argument Description
%1 The port number of the port which has just come up.