Allied Telesis LanEdge Print Server - Manual (Page 7)

Page 5
Figure 2: Available Ports (Win 95)
Note: If you click the Configure Port button, you will see
the Configure Print Server screen again.
5. Follow the on-screen instructions to finish adding a printer
as normal.
In Windows NT, do NOT enable sharing on this
printer.
6. Installation is now complete.
You can now print using this printer.
Installing Additional Ports (95/98/NT4.0)
If the Print Server has more than 1 port, you need to install a
Windows printer for each port, as follows:
1. Select Start - Settings - Printers and click on the printer
just added. Then select File-Properties. The Properties
screen will appear.
2. Find the Add Port button.
On Windows 95/98, it is on the Details tab.
On Windows NT 4.0, it is on the Ports tab.