Allied Telesis LanEdge Print Server - Manual (Page 4)

Page 2
Windows Peer-to-Peer
Peer-to-Peer printing means that each PC prints directly to the
Print Server's printer. This printing method can be used even if
your LAN does have a Server running NetWare, Unix, or
Windows NT Server.
The Print Server supports both the NetBEUI and TCP/IP
protocols; both may be used simultaneously.
•
For NetBEUI, no Print Server configuration is required.
•
If TCP/IP is used, the Print Server must be allocated an IP
Address, as follows:
Assigning an IP Address to the Print Server
1. Run the SETUP program in the root directory of the CD-
ROM. Select Utilities, and install Windows Peer-to-peer
Printing.
2. At the Select Protocol window, select the TCP/IP protocol.
3. At the Select Components screen, install ONLY the
SETBOX utility. Do NOT install the Device Driver until
the Print Server is configured.
4. Run the SETBOX program.
5. Enter the Default Name for the Print Server. The Default
Server Name is shown on a sticker on the base of the
device, and consists of 8 letters and/or digits.
6. Enter and save the following IP Addresses.
•
IP Address - use any free value from the IP Address
range used on your LAN.
•
The Gateway Address and Subnet Mask must be the
same as the PCs on your LAN.
Note: When installing on other PCs, do NOT install SETBOX.