Allied Telesis LanEdge Print Server - Manual (Page 18)

Page 16
Unix
Basic Setup
1. Check the sticker on the base of the Print Server for the
Hardware Address.
2. Associate the hardware address of the Print Server with the
desired IP address by using the arp command:
arp -s IP_Address 00:c0:02:xx:yy:zz
IP Address is the IP Address you wish to assign.
00:c0:02:xx:yy:zz is the hardware address.
3. Connect to the Print Server using your Web Browser, by
entering its IP Address in the Address box:
e.g. http://192.168.0.21
4. Configure the TCP/IP and Logical Printers screens.
If you wish, give the Print Server a new name on the
Configure Server screen. Save and exit when finished.
5. Add the required entry to the etc/hosts file, to allow
the Print Server to be addressed by name.
e.g.
ip_address PS_name # comment
Where ip_address and PS_name are the IP Address
and Name you assigned to the Print Server.
LPD Printing
Configure your Unix system for LPD printing to the Print
Server, using the following data:
•
Remote host name is the name of the Print Server.