Allied Telesis AT-FS217 - Manual (Page 35)

AT-FS21x and AT-FS212/x Series Installation Guide
23
!
8 Warning Do not stare into the Laser beam.
At time of installation, the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of manufacture.
!
9 Electrical Notices
Warning: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-
serviceable parts inside. This unit contains HAZARDOUS VOLTAGES
and should only be opened by a trained and qualified technician. To avoid
the possibility of ELECTRIC SHOCK, disconnect electric power to the
product before connecting or disconnecting the LAN cables.
!
10 This is a “CLASS 1 LED PRODUCT” (AT-FS21x models)
!
11 Lightning Danger
Danger: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
!
12 Caution: Power cord is used as a disconnection device. to de-energize
equipment, disconnect the power cord.
!
13 Pluggable equipment, the socket outlet shall be installed near the
equipment and shall be easily accessible.
!
14 Caution: Air vents must not be blocked and must have free access to the room
ambient air for cooling.
!
15 Power to the hub must be sourced only from the adapter.
USA/Canada
Use a UL Listed/CSA Certified AC adapter of DC 3.3V, 1.5A.
Europe - EU
Use TÜV licensed AC adapter of DC 3.3V, 1.5A.
UK
Use a UK Safety Approved AC adapter of DC 3.3V, minimum 1.5A.
!
16 Operating Temperature: This product is designed for a maximum ambient
temperature of 40 degrees C.
!
17 All Countries: Install product in accordance with local and National Electrical
Codes.
Normen: Dieses Produkt erfüllt die Anforderungen der nachfolgenden Normen.
!
1 Hochfrequenzstörung EN55022 Klasse B
!
2 Warnung: Bei Verwendung zu Hause kann dieses Produkt Funkstörungen
hervorrufen. In diesem Fall müßte der Anwender angemessene Gegenmaßnahmen
ergreifen.
!
3 Störsicherheit EN55024
!
4 Achtung: Für dieses Produkt sind abgeschirmte Kabel erforderlich, damit den
Richtlinien für Emission und Interferenzschutz entsprochen wird. Falls das Produkt
mit nicht abgeschirmten Kabeln verwendet wird, können weitergehende
Maßnahmen für die Korrektur von Interferenzproblemen auf Kosten des Benutzers
notwendig werden.
!
5 Elektrische Sicherheit EN60950 (TUV), UL1950 (UL/cUL)
!
6 Laser EN60825