Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGER - Manual (Page 47)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
$MINVALUE
Lowest value of the variable during the monitoring period.
$AVERAGE
Average value of the variable during the monitoring period.
$MAXLIMIT
Threshold value configured for the variable.
For trap events
$TRAPHOST
The host name of the device which sent the trap.
$TRAPIPADDR
The IP address of the device which sent the trap.
$GENERICTRAP
The generic trap number.
$SPECIFICTRAP
The specific trap number.
$ENTERPRISEOID
The trap's enterprise OID.
$ENTERPRISENAME
The name of the Trap MIB object. If AT-View Plus Device Manager cannot get an object
name, $ENTERPRISEOID is used instead.
$TIMETICKS
The trap's TIMETICKS.
$VAROIDn
The OID of the n
th MIB object sent with the trap, where n is a number in the range 1 to 9.
$VARNAMEn
The name of the n
th MIB object sent with the trap, where n is a number in the range 1 to 9. If
AT-View Plus Device Manager cannot get a name, $VAROIDn is used instead.
$VALUEn
The value of the n
th MIB object sent with the trap, where n is a number in the range 1 to 9.
5.3.4 Other Tab
In the Other tab, you can configure how MIB variables are displayed and the character encoding
system to use in sending and receiving SNMP data. Note that changes made here apply to windows
which are opened after the change is applied. Windows which are already open are not affected by
the changes.
PN 613-50504-00 Rev D Page 47 of 119