Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGER - Manual (Page 32)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Select Target Host dialog box
Target host
The host name or the IP address of the target host. To see the description of the host, fill in
host name or IP address and click Confirm. To connect to the host, click OK.
Community name
The community strings to use in performing SNMP operations on the target host. There are
three types of community strings for the SNMP. Be sure to specify strings which match the
ones configured on the target host.
By default, the following strings are used.
for the Get operation
public
for the Set operation
private
PN 613-50504-00 Rev D Page 32 of 119