Allied Telesis SwitchBlade Line Card - Manual (Page 3)

Quick Install Guide 3
C613-04030-01 REV H
Models Covered By This Guide
This Quick Install Guide includes information on installing the following line
cards. The suffix V2 indicates the silicon revision level:
■ AT-SB4311 48-port 10BASE-T/100BASE-TX (RJ-45)
AT-SB4311 V2
■ AT-SB4352 32-port 100BASE-FX (MT-RJ)
AT-SB4352 V2
■ AT-SB4412 24-port 10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
AT-SB4412 V2
■ AT-SB4441 8-port 1000BASE-X (GBIC)
AT-SB4441 V2
■ AT-SB4442 V2 24-port 1000BASE-T copper or
1000 BASE (SX,LX or ZX) fibre (SFP)
■ AT-SB4541 1-port 10GBASE-LR (XFP)
■ Information on installing switch controllers can be found in the SwitchBlade
Switch Controller Quick Install Guide.
Quick Install Guide updates can be downloaded from
www.alliedtelesyn.co.nz/support/switchblade/.
SwitchBlade
Printed Acrobat PDF Website
Documentation Roadmap
Safety and Statutory Information Booklet
Chassis & Fan Tray Quick Install Guide
Switch Controller Quick Install Guide
Software Reference
Hardware Reference
General Customer Support
Visit www.alliedtelesyn.co.nz for
the latest documentation, FAQs,
and support information.
Line Card Quick Install Guide
Power Supply Unit Quick Install Guide
Bandwidth Expander Quick Install Guide