Cleaning & caring – Aga Ranges DESN 513534 User Manual
Page 40
General
z
Always switch OFF at the mains before cleaning.
z
Use as little water as possible.
z
Do not use CAUSTIC CLEANING SOLUTIONS.
z
Do not use a steam cleaner to clean this cooker.
z
Wipe up any spills as they occur and transfer pans to other burners to continue cooking.
z
TAKE CARE NOT TO DAMAGE THE OVEN THERMOSTAT PHIAL OR THE HOTPLATE
IGNITION ELECTRODES DURING CLEANING.
z
After cleaning, ensure all parts are thoroughly dry before replacing.
z
When re-fitting the burner caps and burner heads make sure that they are properly located.
(See Figs. 14-16).
z
THE FOLLOWING PARTS ARE NOT DISHWASHER SAFE:
Aluminium burner heads (LHR, RHR, RHF).
IMPORTANT: Aga recommend Vitreous Enamel Association approved cleaners for
cleaning the vitreous enamelled surfaces of this product.
They are unsuitable for use on: chrome and stainless steel components, hand-rails and
their brackets.
THE COOKER CANNOT BE MOVED ONCE INSTALLED.
DO NOT ATTEMPT TO MOVE THE COOKER BY PULLING THE HANDRAIL OR DOORS.
40
CLEANING & CARING