Allied Telesis Uplink Module - Manual (Page 3)

Installation and Safety Guide 3
613-000689 Rev A
Package Contents
The following items are included with each uplink module. Contact your authorised
Allied Telesis distributor or reseller if any items are damaged or missing.
■ One uplink module.
■ One Uplink Module Installation and Safety Guide.
■ One warranty card.
Compatible Switches
Caution Attempting to install an expansion module into a switch which is not
compatible may damage the switch and the expansion module. Compatible
expansion modules are listed in your switch’s Hardware Reference. If you are unsure
of a module's compatibility, contact an authorised Allied Telesis distributor or
reseller.
The following uplink modules are compatible with all Rapier switches,
Rapier i switches, AT-8700XL switches and AT800 modular switching routers:
■ AT-A35/SX
■ AT-A35/LX
■ AT-A39/T
■ AT-A42/GBIC
The following uplink modules are compatible with Rapier G6 and G6F switches, all
Rapier i switches and all AT-8700XL switches:
■ AT-A40/SC
■ AT-A40/MT
■ AT-A41/SC
■ AT-A41/MT
Installing an Uplink Module
Follow these steps to install an uplink module into a switch or switching router:
1. Read the safety information.
For safety information, see the Safety and Statutory Information booklet for your
switch. A copy of this booklet is supplied with each switch, and can also be
downloaded from
www.alliedtelesis.com/support/ .