Allied Telesis AT-S63 - Manual (Page 44)

Chapter 1: Overview
44
Remote Secure
Shell (SSH)
Sessions
The AT-S63 Management Software also has a Secure Shell (SSH) server
for remote management from SSH clients on your network. An SSH
management session is similar to a Telnet management session except it
uses encryption to protect the session from snooping.
Here are the management interfaces that you can use from remote SSH
management sessions:
ˆ Standard command line
ˆ AlliedWare Plus command line
ˆ Menus
Remote Web
Browser Session
The AT-S63 Management Software also comes with a web browser server
and a web browser interface for remote management using a web browser
at a workstation on your network. A web browser session can be either
non-encrypted (HTTP) or encrypted (HTTPS).
Remote SNMP
Management
You can also remotely configure the switch using a Simple Network
Management Protocol (SNMP) application, such as AT-View. This
management method requires an understanding of management
information base (MIB) objects.
The AT-S63 Management Software supports the following MIBs:
ˆ SNMP MIB-II (RFC 1213)
ˆ Bridge MIB (RFC 1493)
ˆ Interface Group MIB (RFC 2863)
ˆ Ethernet MIB (RFC 1643)
ˆ Remote Network MIB (RFC 1757)
ˆ Allied Telesis managed switch MIBs
The Allied Telesis managed switch MIBs (atistackinfo.mib and
atistackswitch.mib) are available from the Allied Telesis web site.
Note
The switch must have an IP address for remote Telnet, SSH, or
SNMP management. For background information, refer to “IP
Configuration” on page 47.