Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 24)

Chapter 1: Overview
24
Compact Flash Card Slot
The switches have slots for compact flash memory cards. You can use the
cards to store configuration files or the AT-S63 Management Software
image file. Compact flash memory cards can make it easier for you to
upgrade the files on a switch or transfer files between AT-9400 Switches.
Figure 6 Compact Flash Card Slot
Note
A flash memory card is not required for normal operations of the
switch.
Note
The only active compact flash card slot in a stack is on the master
switch. The slots on the member switches are deactivated and are
not accessible.
The AT-9400 Switches support only the AT-CF128A 128MB compact
flash card from Allied Telesis. Contact your Allied Telesis sales
representative for more information.
To insert a compact flash card, position it so that the manufacturer’s brand
label is facing up and press it into the slot until the button marked “Eject”
pops out.
To remove the compact flash card, press the button marked “Eject” until it
is pressed in completely and then remove the compact flash card.
For information on how to transfer files to and from a flash memory card,
refer to the AT-S63 Management Software User’s Guides.
AT-9424Ts/XP
1 3 5 7 9 11 13 15 17 19 21R 23R
2 4 6 8 10 12 14 16 18 20 22R 24R
EJECT
TER
P COMPACT FLASH
L/A
D/C
D/C
L/A L/A
X / COL
100 LINK / ACT
STACK
PRES
MSTR 21
22
23
24
SFP
L/A 1
2
L/A
26
XFP