Allied Telesis B57UDIAG - Manual (Page 8)

BCM570x • B57UDIAG User’s Guide
page 4
Broadcom Confidential and Proprietary
The feature is used to execute a field upgrade of entire NVRAM
image. The new NVRAM image is programmed into a/the device/s
of a system if there is a match of the PCI DID, VID, SDID & SVID
of firmware and device. Media Manufact Region and Media VPD
Block in NVRAM will be preserved. If the Advance Firmware,
such as ASF and IPMI, is present, the Configuration Block of the
firmware will also be preserved. Three addition command line
parameters, “-updateasfcfg”, “-updatesecfg”, “-updateiscsicfg” and
“-sil”, can be used along with “-firmall” command.
-updateasfcfg Update the advance firmware configuration block of NVRAM with
that of the NVRAM image provided by “-firmall” command. When
“-updateasfcfg” command line parameter is entered before “-firmall”
command, the Advance Firmware Configuration Block of the
NVRAM will not be preserved. It will get updated by the input file
of “-firmall” command. The “-firmall” command is described above.
-updatesecfg Update the Media Manufact Region and Media VPD Block, of
NVRAM with that of the NVRAM image provided by “-firmall”
command. When “-updatesecfg” command line parameter is entered
before “-firmall” command, the Meida Manufact Region and Media
VPD Block of the NVRAM will not be preserved. They will get
updated by the input file of “-firmall” command. The “-firmall”
command is described above.
-updateiscsicfg Update the ISCSI firmware configuration block of NVRAM with
that of the NVRAM image provided by “-firmall” command. When
“-updateiscsicfg” command line parameter is entered before “-
firmall” command, the ISCSI Firmware Configuration Block of the
NVRAM will not be preserved. It will get updated by the input file
of “-firmall” command. The “-firmall” command is described above.
-ver Version of the current software/eeprom.bin
-pxe Programming PXE firmware from file
-elog Produces a log file with only error information
-pipmi Programming IPMI firmware from
-ipmi Enable/Disable (value=0/1) IPMI in manufacture mode
-uipmi Upgrading IPMI firmware from file if IPMI firmware is
originally loaded.
-dir Display file directory in NVRAM
-pump1 Programming UMP firmware from file
-uump Upgrading IPMI firmware from file if UMP firmware is originally
loaded.
-u Enable/Disable (value = 1/0) UMP in manufacture mode.
-piscsi Option to program iSCSI code into the NVRAM
-piscsicfg Option to force program iSCSI CFG code into NVRAM
It should be used along with –piscsi.
-piscsiprg Option to force program iSCSI PRG code into NVRAM
It should be used along with –piscsi.