Allied Telesis B57UDIAG - Manual (Page 14)

BCM570x • B57UDIAG User’s Guide
page 10
Broadcom Confidential and Proprietary
4.12 updateiscsicfg
cmd: - updateiscsicfg
Description: Update the ISCSI firmware configuration block of NVRAM with that of the
NVRAM image provided by “-firmall” command. When “-updateiscsicfg” command
line parameter is entered before “-firmall” command, the ISCSI Firmware Configuration
Block of the NVRAM will not be preserved. It will get updated by the input file of “-
firmall” command. The “-firmall” command is described above.
Syntax: [-]updateiscsicfg
Example:
C:\>b57udiag –c 0 –firmall eeprom.bin -updateiscsicfg
Upgrade eeprom on device 0, if device ID embedded in eeprom.bin matches with
device 0. The ISCSI Configuration block will be update according to the
eeprom.bin.
4.13 ver
cmd: -ver
Description: Display B57UDIAG version and all devices installed.
Syntax: [-]-ver
Example:
C:\>b57udiag –vev
4.14 pxe
cmd: pxe
Description: Program PXE firmware with specified.
Syntax: [-]pxe
Example:
C:\>b57udiag –pxe b57pxe.bin –c 0
Program PXE code on device 0