beautypg.com

Installing the switch on a desktop, Figure 7. attaching the rubber feet – Allied Telesis AT-FS750/48 User Manual

Page 38

background image

Chapter 2: Installation

38

Installing the Switch on a Desktop

To install the switch on a desktop, perform the following procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. Turn the switch over and attach the four rubber feet to the bottom of

the switch as shown in Figure 7.

Figure 7. Attaching the Rubber Feet

3. Turn the switch over again and place it on a flat, secure surface (such

as a desk or table) leaving ample space around the unit for ventilation.

4. If you plan to install SFP transceiver modules, go to the next step at

“Installing an SFP Transceiver” on page 44. Otherwise, your next step
is “Cabling and Powering On the Switch” on page 46.

1714

48 Por

t 10/100 Mbps

WebSmar

t Switch with 2 Combo SFP

Por

ts

1734