Allied Telesis AT-FS705L - Manual (Page 24)

Chapter 2: Installation
24
Selecting a Site for the Switch
Observe the following requirements when choosing a site for the
AT-FS705L Fast Ethernet switch:
ˆ If you are installing the switch on a table, be sure that the table is level
and secure.
ˆ The power outlet for the switch should be located near the unit and
should be easily accessible.
ˆ The site should provide for easy access to the ports on the front of the
switch. This will make it easy for you to connect and disconnect
cables, as well as view the switch’s LEDs.
ˆ To allow proper cooling of the switch, air flow around the unit and
through its vents on the side and rear should not be restricted.
ˆ Do not place objects on top of the switch.
ˆ Do not expose the switch to moisture or water.
ˆ Ensure that the site is a dust-free environment.
ˆ Use dedicated power circuits or power conditioners to supply reliable
electrical power to the network devices.