Rmc 7132, Xacpi configuration – Acnodes RMC 7132 User Manual

Page 85

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7132

1U Rackmount System

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the onboard fans. The
CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the
fan speed will also increase, and vice versa. Select Workstation if your system is used as a Worksta-
tion. Select Server if your system is used as a Server. Select "Disabled, (Full Speed @12V)" to dis-
able the fan speed control function and allow the onboard fans to constantly run at the full speed (12V).
The Options are: Disabled, 4-pin (Server), 4-pin (Super Quiet) and 4-pin (Workstation).

Fan1 ~ Fan 5 Reading

This feature displays the fan speed readings from fan interfaces Fan1 through Fan5.

Vcore, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3VSB, and VBAT

XACPI Configuration

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management
settings for your system.

USB Device WakeUp

This feature is used to awaken from Standby mode by a Universal Serial Bus (USB) device (such as, a
USB mouse or USB keyboard). The options are Enabled and Disabled.

PS/2 KB/MS WakeUp

This feature is used to awaken from Standby mode by a PS/2 mouse or PS/2 keyboard. The options
are Enabled and Disabled.

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System.
Otherwise, disable this feature. The options are Yes and No.

Headless Mode

This feature is used to enable system to function without a keyboard, monitor or mouse attached The
options are Enabled and Disabled.

ACPI Version Features

The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further expla-
nation: http://www.acpi.info/