Rmc 7132 – Acnodes RMC 7132 User Manual

Page 14

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7132

1U Rackmount System

1-3

Server Chassis Features

The following is a general outline of the main features of the RMC7132 chassis.

System Power

The RMC7132 chassis includes a single 280W power supply.

SATA Subsystem

The RMC7132 chassis was designed to support one internal 3.5" Serial ATA hard drive. This SATA
drive is not hot-swappable; power must be removed from the system before installing or replacing.
ATA/100 IDE drives can be alternately supported.

Note: The operating system you use must have RAID support to enable the hot- swap capability of the
SATA drives.

Control Panel

The control panel on the RMC7132 provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions.
The control panel also includes a main power button and a system reset button.

Rear I/O Panel

The rear I/O panel on the RMC7132 provides one motherboard expansion slot, one COM port (another
is internal), two USB ports, PS/2 mouse and keyboard ports, a graphics port and two Gb Ethernet
ports.

Cooling System

The RMC7132 chassis has an innovative cooling design that features one 10-cm blower-type system
cooling fan. The blower fan plugs into a chassis fan header on the motherboard and an air shroud
channels the airflow to efficiently cool the processor area.

A fan speed control setting in BIOS allows fan speed to be determined by system temperature [the
recommended setting is 3-pn (Server)].