Rmc 7132 – Acnodes RMC 7132 User Manual

Page 63

Text mode
Original mode

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7132

1U Rackmount System

Mounting a SATA Drive in a Drive Carrier

1. Install a drive into the carrier with the printed circuit board side toward the carrier so that the
Mounting holes align with those in the carrier.

2. Secure the drive to the carrier with four screws, as shown in Figure 6-3.

Installing/Removing SATA Drives

1. To remove, first push the release button located beside the drive LEDs

2. Swing the colored handle fully out and use it to pull the unit straight out (see Figure 6-4).

3. To install, simply push the drive carrier into its bay until fully seated.