Rmc 7132 – Acnodes RMC 7132 User Manual
Page 41
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7132
1U Rackmount System
Memory Support
The RMC7132 supports up to 24 GB of unbuffered ECC or non-ECC DDR3 1333/1066/800 in
6 DIMM slots. Populating the DIMM slots with a pair (or pairs) of memory modules of the same type and
size will result in interleaved memory, which will improve memory performance.
Populating DIMMs
For memory to work properly, follow the table below for memory installation:
Maximum Memory Possible
Single Rank UDIMMs - 12GB (6x 2GB DIMMs), Dual Rank UDIMMs - 24GB (6x
4GB DIMMs)
o Both unbuffered ECC and non-ECC DIMM modules are supported by the motherboard. Using
ECC or non-ECC memory on your motherboard depends on the CPU installed.
o Due to OS limitations, some operating systems may not show more than 4 GB of memory.
o Due to memory allocation to system devices, the amount of memory that remains available for op-
erational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is dis-
proportional. Refer to the table below.