Rmc 7132 – Acnodes RMC 7132 User Manual

Page 48

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7132

1U Rackmount System

Chassis Intrusion

The Chassis Intrusion header is des- ignated JL1.
Attach an appropriate cable from the chassis to
inform you of a chassis intrusion when the chas- sis
is opened

Wake-On-LAN

The Wake-On-LAN header is desig- nated JWOL
on the serverboard. See the table on the right for
pin defini- tions. You must also have a LAN card
with a Wake-On-LAN connector and cable to use
this feature.

External Speaker/Internal Buzzer

On the JD1 header, pins 1-4 are for an external
speaker and pins 3-4 are for the internal speaker. If
you wish to use an external speaker, connect it to
pins 1-4 to. If you wish to use the onboard speaker,
you should close pins 3-4 with a jumper.

Overheat/Fan Fail LED

The JOH can be connected to an LED to pro-
vide warning of chassis overheat. This LED will
also blink to indicate a fan failure. Refer to the table
on the right for pin definitions.

Onboard Power LED

An onboard Power LED header is located at
JLED. This header con- nects to the control panel
header (JF1) to indicate the status of system
power. See the table on the right for pin definitions.