ALESIS QS7 - Manual (Page 98)

Chapter 7: Editing Effects
C ONFIGURATION #4: R EVERB AND EQ
Pitch 1 Delay 1 Reverb 1
Mono chorus Mono delay Plate 1
Stereo chorus Stereo delay Plate 2
Mono flange Ping-Pong delay Room
Stereo flange Hall
Pitch detune Large
Resonator Gate
Reverse
Pitch 2 Delay 2 Reverb 2
Mono chorus Mono delay Balance and level
Stereo chorus Stereo delay to Reverb 1
Mono flange Ping-Pong delay
Stereo flange
Pitch detune
Resonator
In this Configuration, note that Sends 1 and 2 are identical to that of Configuration #1.
However, Sends 3 and 4 have been removed. In their place, we have added a
shelving EQ module to the main outputs. This means you have bass and treble boost
controls for all sounds coming out of the main outputs (not just the sounds routed to
the Effects Sends).
J If you are using Configuration #4, routing any of the Program’s Sounds to Sends 3 or
4 will have no effect. In other words, it’s as if you routed channels of your mixing
console to effects sends that aren't connected to anything.
96 QS7/QS8 Reference Manual