Asus P3V4X - Manual (Page 24)

24 ASUS P3V4X User’s Manual
3. HARDWARE SETUP
CPU
3. H/W SETUP
3.6.2 Attaching the Heatsink
NOTE: If provided, you should follow the heatsink attachment instructions that
came with your heatsink or processor. The following steps are provided only as a
general guide and may not reflect those for your heatsink.
1. Attach the heatsink to the processor core with a good quality thermal interface
material.
2. Mount the heatsink to the processor package.
Using SECC fan with Pentium ® II
Push the two lock arms one direction to clamp the heatsink onto the processor
and the other direction to release.
Using SECC2 fan with Pentium ® III
Insert the four heatsink’s pins through the holes of the SECC2. Place the metal
clip on the ends of the pins and slide until it locks into place.
NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the
SECC2 heatsink and fan except that the clamping design is different.
WARNING! Make sure the heatsink is mounted tightly against the SECC2, SECC,
or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to
provide adequate circulation across the processor’s passive heatsink.
Lock Arm Lock Arm
Four Pins and metal clip