Accusplit EAGLE 920HRM - Manual (Page 9)

8.2 Setting the Heart Rate Alert Mode
To Set the Heart Rate Alert Mode
To preset your target heart rate:
1) Input your target heart rate range (lower and upper limits), or
2) I n p u t y o u r a g e a n d g e n d e r ( l o w e r a n d upper limits will be automatically
calculated).
To set the heart rate alert mode, press and hold the [mode] button for about 2 seconds to
select the setting display (the 'age' digits will start flashing).
The Setting Sequence
• When the 'age' digits start to flash, press the [mode] button to move the flash following the
sequence of the adjacent diagram, or press the [start/stop] or [reset] button to scroll
through the setting (hold the button down to scroll at a faster pace). If the 'gender' is
flashing, press the [start/stop] or [reset] button to scroll the setting between 'M' (male) and
'F' (female).
• If one of the settings (upper limit and lower limits) is flashing, press the [start/stop] or
[reset] button to scroll through the setting (hold the button down to scroll at a faster pace).
• When the designated setting appears, press and hold the [mode] button for about 2
seconds to exit the setting sequence. The setting display will change to Current Time
Mode automatically if NO keystroke has been activated for about 1 minute.
ACCUSPLIT EAGLE 920HRM Instructions 9 of 18