Accusplit EAGLE 920HRM - Manual (Page 13)

10.1 Using the Chronograph Mode
To Use the Chronograph Mode
• In 'Zero' Display, press the [start/stop] button once to start the counting. When it is counting,
press the [start/stop] button once again to stop the counting, and the elapsed time of which
the chronograph is counting will appear.
• When the elapsed time is displaying, repeat the above mentioned key operations to get the
accumulative elapsed time or press the [reset] button to reset the chronograph (ready for a
new counting). Check the coming 'To Reset the Chronograph' Section for more detail on how
to reset the chronograph.
To Reset the Chronograph
• To reset the chronograph to 'Zero', press the [reset] button once when the chronograph has
stopped counting.
ACCUSPLIT EAGLE 920HRM Instructions 13 of 18