Accusplit EAGLE 920HRM - Manual (Page 4)

6.1 Setting the Current Time Mode
To Set the Current Time Mode
To set the current time and date, and their display formats, press and hold the [mode] button
for about 2 seconds to select the setting display (the second digits will start flashing).
The Setting Sequence
• When the seconds digits start to flash, press the [mode] button to move the flashing
following the setting sequence of the adjacent diagram or press the [start/stop] or [reset]
button to reset the second digits to zero.
• If one of the settings (minute, hour, year, month, date) is flashing, press the [start/stop]
or [reset] button to scroll through the setting (hold the button down to scroll the setting at
a faster pace).
• When the 'month-date' or 'date-month' digits is flashing, press the [start/stop] or [reset]
button to switch between month-date ('m' icon appear) and date-month ('d' icon appear).
• When the '12' or '24' icon is flashing, press the [start/stop] or [reset] button to switch
between '12' (12 hour format) and '24' (24 hour format).
• When the beep 'on' or 'oF' icon is flashing, press the [start/stop] or [reset] button to
switch between 'on' (key tone ON) and 'oF' (key tone OFF).
• When the designated setting appears, press and hold the [mode] button for about 2
seconds to exit the setting sequence. The setting display will change to Current Time
Mode automatically if NO key-stoke has been activated for about 1 minute.
ACCUSPLIT EAGLE 920HRM Instructions 4 of 18