Accusplit Eagle 602M100 - Manual

602M100
MULTI-FUNCTION STOPWATCH
Operating Instructions for STOPWATCH only
(Repeated here from the enclosed, complete Instruction Booklet)
Press MODE button until you see “CHRONO" in
the display.
The stopwatch can display up to 19 hours,
59 minutes, 59.99 seconds in this tormat:
0
:
00
'
00
"
00
0
:
00
'
00
"
00
0
:
00
'
00
"
00
The upper display shows the Cumulative
(CUM) time,
the middle display shows the Lap (LAP) time, and
the Running Cumulative (CUM) time is displayed
on the lower display.
Whenever the stopwatch stops running, the
“STCP" indicator will be CN.
Press the START button to start the stopwatch.
As it runs, the current elapsed CUM time is shown
on the lower display.
To view the current Dual Split time, press SPLIT
button.
The number ot splits is shown on the upper
lett corner.
The corresponding Dual Split times are displayed
on the upper and middle display.
Press SPLIT again, the next Dual Split time will be
shown and the number ot Splits taken is updated.
The Dual Split time will be trozen tor tive seconds.
Atter tive seconds, the Display returns to the
running CUM and LAP times.
Press STCP button to stop the stopwatch.
The last Dual Split time will also be stored
(provided that the last split time is not the tirst
split time).
The stopwatch can store up to 100 Dual Split times.
The tastest lap, the slowest lap and the averages ot
all laps will also be recorded.
When there are tive tree memories lett, the icon
“LULL” will blink to remind you ot the nearly
tull situation.
Whenever the storage is tull, extra Split times will
not be stored into memory but will still be shown
on the display.
Any new tastest and slowest laps will not be stored.
The memory counter will tiash “100" as the extra
Split times are being displayed.
The icon “LULL” will be steadily CN.
You can clear the memories by stopping and
resetting the watch.
To stop the stopwatch, press STCP.
The indicator “STCP" will come on again to show
the status.
Press RECALL button to review the saved Dual
Split times, including Lastest Lap, Slowest Lap
and Average Lap times.
“RECALL” will be shown tor a second.
The CUM and LAP Split time will be displayed on
the upper and the middle display, respectively.
The lower display shows the current running CUM
time, unless it has been stopped.
The Lastest LAP time will be reviewed tirst.
Then the Slowest LAP time with next push ot
RECALL button.
Then the Average LAP time.
Press RECALL to review each ot the stored
Split times.
The recall starts trom the last Split to the tirst Split
when the stopwatch is running and vice versa
when the stopwatch has been stopped.
During memory recall, press either START/STCP
or SPLIT button to make a Stop or Split action and
continue operating Stopwatch.
Atter recalling to the tirst split time, press
RECALL once more to automatically exit trom
Memory Recall mode and return to Stopwatch
Cperate mode.
The "RECALL" icon will be CEL.
Press RESET atter the stopwatch stops to reset the
stopwatch display.
When the stopwatch starts running trom Reset
state, all the lap memories will be cleared.
The saved times remain in the memory available
tor RECALL, until the START ot the next event.
o
o
H
P h
m
m
B
9
00
00
o\
<
U
@
t:
o
s
I
O
s ^
to
. O h
m
o p
(N u
u
T3
CO
00
3
CO
s
o
T)
'h
(N
ON
^ X
(N <
-H [J h
00
00
00
O
P
IT)
EC (N
P
^ •
< §
o
(N
'h
ON
6
o
00