Accusplit EAGLE 920HRM - Manual (Page 16)

11.2 Using the Timer Mode
To Use the Timer Mode
• Once a target time has been set (for example 30 minutes), press the [start/stop] button once
to start the countdown. The countdown time will be displayed continuously throughout the
countdown.
• To stop countdown, press the [start/stop] button once.
To Reset the Timer
• To reset the timer to the preset target time before the countdown reaches zero, press the
[reset] button once (when the timer has stopped counting).
• To start the counter at a target time, set a new value for the target time. Check the previous
'11.1 Setting the Timer Mode' Section for more detail on how to set the Timer Mode.
Timer Alarm Sound
• When the timer nears the last 5 seconds, the watch will beep once for each second left.
When it hits zero, the watch will beep for about 10 seconds
• You can stop the beeping by pressing any button (except the [light] button).
ACCUSPLIT EAGLE 920HRM Instructions 16 of 18