Avaya ALGO-8028-SM - Manual (Page 8)

JAO; Reviewed:
SPOC 11/3/2011 Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
8 of 29
Algo-8028-SM
5.2. Configure Station
Use the add station command to add station for the 8028 SIP Doorphone. Use 9640SIP for the
Station Type. The Name field is optional. Use the default values for the other fields. The SIP
station can also be configured automatically by Session Manager as described in Section 6.7.
add station 78300 Page 1 of 6
STATION
Extension: 78300 Lock Messages? n BCC: 0
Type: 9640SIP Security Code: TN: 1
Port: IP Coverage Path 1: COR: 1
Name: 78300, Doorphone Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Time of Day Lock Table:
Loss Group: 19
Message Lamp Ext: 78300
Display Language: english Button Modules: 0
Survivable COR: internal
Survivable Trunk Dest? y IP SoftPhone? n
IP Video? n
Use the change off-pbx-telephone station-mapping command to map the Communication
Manager extension to the same extension on Session Manager. Enter the field values shown
below. For the sample configuration, the Trunk Selection field is set to aar so that AAR call
routing is used to route calls to Session Manager. AAR call routing configuration is not shown
in these Application Notes. The Config Set value can reference a set that has the default
settings.
change off-pbx-telephone station-mapping 78300 Page 1 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station Application Dial CC Phone Number Trunk Config Dual
Extension Prefix Selection Set Mode
78300 OPS - 78300 aar 1