Samsung HT-D5210C-ZA User Manual

Page 71

English

Other Information

Symptom

Check/Remedy

Aspect ratio cannot be changed.

• You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3

Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.

• The product is not working.

(Example: The power goes out
or a strange noise is heard.)

• The Product is not working

normally.

• Press and hold the romote control's STOP (

I ) button for 5 seconds in

STANDBY mode.

- Using the RESET function will erase all stored settings.

Do not use this unless necessary.

You have forgotten the rating
level password.

• With no disc in the product, press and hold the product's STOP (

I ) button for

longer than 5 seconds. INIT appears on the display and all settings will return
to the default values.
And then press the POWER button.

- Using the RESET function will erase all stored settings.

Do not use this unless necessary.

Can't receive radio broadcasts.

• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area

with good reception.

While listening to TV audio
through the Product, no sound is
heard.

• If the OPEN/CLOSE (

) button is pressed while listening to TV audio using the

D. IN or AUX functions, the BD/DVD functions are turned on and the TV audio is
muted.

"Not Available" appears on
screen.

• The features or action cannot be completed at this time because:

1. The BD/DVD’s software restricts it.
2. The BD/DVD’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.

If the HDMI output is set to a
resolution your TV cannot support
(for example, 1080p), you may not
see a picture on your TV.

• Press and hold the STOP (

I ) button on front panel for more than 5 seconds

with no disc inserted. All settings will revert to the factory settings.

No HDMI output.

• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.

Abnormal HDMI output screen.

• If random noise appears on the screen, it means that TV does not support

HDCP (High-bandwidth Digital Content Protection).

HT-D5210C_ZA_1224.indd 71

2011-12-26 11:32:31