Samsung SCH-A530ZSVXAR User Manual

Page 111

Specific Absorption Rates (SAR) for Wireless
Phones

The SAR is a value that corresponds to the relative amount of RF energy

absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing, measuring and

calculation process. It does not represent how much RF the phone emits. All

phone models are tested at their highest value in strict laboratory settings. But

when in operation, the SAR of a phone can be substantially less that the level

reported to the FCC. This is because of a variety of factors including its

proximity to a base station antenna, phone design and other factors. What is

important to remember is that each phone meets strict federal guidelines.

Variations in SARs do not represent a variation in safety.

All phones must meet the federal standard, which incorporates a substantial

margin of safety. As stated above, variations in SAR values between different

model phones do not mean variations in safety. SAR values at or below the

federal standard of 1.6 W/kg are considered safe for use by the public.

This wireless portable device has been shown to be capable of compliance for

localized specific absorption rate (SAR) for uncontrolled environment/general

population exposure limits specified in ANSI/IEEE Std. C95.1-1999 and has

been tested in accordance with the measurement procedures specified in

ANSI/IEEE Std. C95.3-1992.

Part 24 CDMA 1900 MHz (PCS Mode) - Head max: 1.44 W/Kg,

Body Max: 1.39 W/Kg

Part 22 CDMA 800 MHz - Head max: 1.47 W/Kg, Body Max: 1.10 W/Kg