Samsung HT-P1200T-XAA - Manual (Page 35)

ENG
67 68
Setting the DRC
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1 2 In Stop mode,
press
MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER button.
• When the Cursor button is pressed, the
effect is greater, and when the Cursor
button is pressed, the effect is smaller.
3 4
Press Cursor
button to move to
‘DRC’ and then press
ENTER button.
Press Cursor ,
to adjust the
‘DRC’.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
SETUP
AV SYNC Setup
• 'Audio' menu appears.
2 1
• Setup menu appears.
• AV-SYNC screen appears.
3
Press Cursor , buttons
to move to ‘Audio’ and then
press
ENTER button.
Press Cursor , buttons
to move to ‘AV-SYNC’ and
then press
ENTER button.
Press the MENU button.
4
• You can set the audio delay time between 0 ms and
300 ms. Set it to the optimal status.
Press Cursor , buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.