Samsung HT-P1200T-XAA - Manual (Page 13)

ENG
24
Connecting External Components
23
Example: Digital signal components such as a Set-top Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not supplied)
CONNECTIONS
Press AUX on the remote control to select ‘D.IN 1 or D.IN 2’.
• Each time the button is pressed, the selection changes as follows: USB ➝ D.IN 1 ➝D.IN 2
➝ AUX .
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ USB ➝ FM .
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.
1
2
• To listen to the audio from the TV in 5.1 channel through the main unit, press the Dolby Pro
Logic II or the SUPER 5.1 button.
• You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable (not supplied)
If the external analog component has only
one Audio Out, connect either left or right.
Note
Press AUX on the remote control to select AUX.
• Each time the button is pressed, the selection changes as follows: USB ➝D.IN 1 ➝D.IN 2 ➝AUX .
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ USB ➝ FM .
Connect Audio In on the Home Theater to Audio Out on the external analog component.
• Be sure to match connector colors.
1
2