Samsung HCR4245WX-XAA - Manual (Page 16)

English-16
4 Press the … or † button to select the antenna
connection, then press the ENTER button.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
When selecting Cable TV system:
Press the … or † button to select “Cable”, then press
the ENTER button.
Press the … or † button to select “STD”, “HRC” or
“IRC”, then press the ENTER button.
• STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify
the type of cable system that exists in your particular
area. At this point the signal source has been selected.
Proceed to “Storing Channels in Memory”.
5 Press the … or † button to select the antennas to
memorize.
Press the ENTER button to select “Start”.
• All available DTV and analog channels are automatically stored in memory when
channels are selected by the direct tuning function.
Select the cable system.
STD
HRC
IRC
T V Auto Program
T V Auto Program
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
T V Auto Program
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
Storing Channels in Memory
Auto Program in Progress.
Air Channel 15
Stop
Auto Program
T V Auto Program
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
6 Press the ENTER button to start the auto program.
The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
Press the EXIT button to exit.
• The TV must be connected to an antenna in order to
receive digital TV signals. Even if a particular channel is
deleted from the memory, you can always tune to that
channel directly by using the number buttons on the
remote control.
BP68-00383B_Quick Guide 2005/01/28 10:21 AM Page 16