Samsung HCR4245WX-XAA - Manual (Page 13)

English-13
5 If a vertical line is visible, use the œ or √ button to
move the line so that it is superimposed on the vertical-
center line (i.e., make a single vertical line that is as
white as possible.)
After the convergence is correctly adjusted, press the
MENU button to exit.
Red
Please Use Remote Control.
6
To return to the factory defaults, select “Reset” by
pressing the … or † button, then press the ENTER
button.
The previously adjusted convergence will be reset to
the factory defaults.
Red √
Blue √
Reset
Manual Convergence T V
4 If a horizontal line is visible, use the … or † button to
move the line so that it is superimposed on the
horizontal center-line (i.e., make a single horizontal line
that is as white as possible.).
Red
Please Use Remote Control.
BP68-00383B_Quick Guide 2005/01/28 10:21 AM Page 13